- Home
- Job guides
- Water heater replacement
Job guide / plumber
What it costs to replace a water heater, line by line
A like-for-like tank swap is a short plumbing job where the heater itself and the code items around it often outweigh the labor. Permit lines we read run from $45.00 flat in Reno to $21.00 plus a $52.00 application in Grand Rapids. The median plumber earns $30.67 an hour nationally, about $52.18 to $62.93 as an implied billed hour.
The bill has four parts
Every water heater invoice, however it is formatted, is made of the same four things: the appliance, the labor to swap it, the parts needed to make the installation pass inspection, and the permit. Flat-rate companies fold all four into one number. Ask for them separately anyway. It is the only way to see whether a high quote is a better heater or a fatter margin.
Labor: short job, long tail
Draining, disconnecting, hauling out, setting and reconnecting a tank in the same spot with the same fuel is routine work for one plumber, sometimes with a helper for the carry. What stretches it:
- Access. An attic, a crawlspace or a closet built around the old tank.
- Fuel or type change. Gas to electric needs a circuit. Tank to tankless usually needs a bigger gas line and new venting. Either can turn one trade into two.
- Venting. A new gas unit may not be allowed on the old flue as it stands.
- Catch-up code work. Expansion tank, drain pan, shutoff valve, sediment trap, earthquake strapping where the local code calls for it. Your building department decides what applies; the plumber should list each item.
| National wage point | Wage / hr | Loaded / hr | Implied billed hr, 15.5% margin | Implied billed hr, 29.9% margin | One worker-day (8 hr) at 29.9% |
|---|---|---|---|---|---|
| 25th percentile | $24.13 | $34.71 | $41.06 | $49.51 | $396 |
| Median | $30.67 | $44.12 | $52.18 | $62.93 | $503 |
| 75th percentile | $40.92 | $58.86 | $69.62 | $83.97 | $672 |
See plumber wages for every metro.
The one-worker-day column is a unit, not an estimate for your house. A clean swap is a fraction of a day; a relocation with new venting is more than one.
What cities charge for the permit
| City | Line on the schedule | Fee | Schedule |
|---|---|---|---|
| Reno, NV | Residential EZ permit: water heater | $45.00 | EZ Permits and Miscellaneous Fees, effective July 1, 2026 |
| Portland, OR | Water heater (fixture or item fee) | $63.00 | Plumbing Permit Fee Schedule, effective July 10, 2026 |
| Portland, OR | Expansion tank | $63.00 | Plumbing Permit Fee Schedule, effective July 10, 2026 |
| Grand Rapids, MI | Plumbing permit application, includes 1 inspection | $52.00 | Planning, Design and Development Fee Schedule, FY 2027, effective July 1, 2026 |
| Grand Rapids, MI | Plumbing: water heater | $21.00 | Planning, Design and Development Fee Schedule, FY 2027, effective July 1, 2026 |
| Grand Rapids, MI | Mechanical, residential replacement: water heater | $21.00 | Planning, Design and Development Fee Schedule, FY 2027, effective July 1, 2026 |
Notice how Portland prices by fixture, with the expansion tank as its own line, while Reno has a single flat EZ permit. Grand Rapids lists a water heater under both plumbing and mechanical replacement equipment; ask which permit your installer pulls. Skipping the permit saves a small sum and leaves you with an uninspected gas appliance, which a home inspector will find when you sell.
Materials are not flat
| Series | BLS series ID | Month | Index | 12 months | Since Jan 2020 |
|---|---|---|---|---|---|
| Plumbing fixtures and fittings | WPU105 | October 2026 (p) | 381.1 | +6.0% | +33.9% |
| Plastics pipe | WPU07210603 | October 2026 (p) | 178.9 | +3.8% | +66.5% |
| CPI-U, all items, U.S. city average | CUUR0000SA0 | September 2026 | 336.9 | +3.7% | +30.6% |
BLS does publish a producer price index for domestic water heaters, but the readings we pulled are flat through the first months of 2026 and then stop, so we leave it out and show the fittings and pipe series instead.
Tax credits: check the date
Heat pump water heaters used to qualify for a federal credit of up to $2,000 a year. The IRS page for the Energy Efficient Home Improvement Credit says the credit covers improvements made through December 31, 2025. A quote written today that subtracts that credit from your cost is out of date. Utility rebates are a separate matter and vary by provider.
Do I need a permit to replace a water heater?
In every city schedule we opened there is a specific water heater line, which tells you those cities expect one: $45.00 in Reno, $63.00 as a fixture fee in Portland, $21.00 plus an application fee in Grand Rapids. Your own building department has the final word.
Why is the installed price so far above the price of the tank at a store?
Because you are also buying a licensed worker's time at a loaded cost of about $44.12 an hour at the national median, the firm's overhead and margin on top, haul-away, the code parts and the permit. Ask for those as separate lines and the gap usually explains itself.
Related guides
- Bathroom remodel
- Gas line installation
- Heat pump water heater installation
- Lawn sprinkler system installation
- Sewer line replacement
- Tile shower installation
Sources
- BLS Occupational Employment and Wage Statistics, May 2025 metropolitan, state and national files
- BLS Employer Costs for Employee Compensation, June 2026, Table 4 (private industry by occupational and industry group)
- NAHB Eye on Housing, Remodelers Saw Profit Margin Gains in 2024 (Remodelers' Cost of Doing Business Study)
- Aswath Damodaran, NYU Stern, Margins by Sector (US), data as of January 2026
- BLS Producer Price Index commodity data and CPI-U, retrieved through the BLS public data API
- Reno, NV: EZ Permits and Miscellaneous Fees, effective July 1, 2026
- Portland, OR: Plumbing Permit Fee Schedule, effective July 10, 2026
- Grand Rapids, MI: Planning, Design and Development Fee Schedule, FY 2027, effective July 1, 2026
- Energy Efficient Home Improvement Credit