- Home
- Job guides
- Furnace replacement
Job guide / HVAC mechanic
Furnace replacement: where the money goes
Swapping a furnace for one of the same type in the same spot is a short, predictable HVAC job plus the equipment; the bill grows when the venting, gas line or ductwork has to change. Permit lines for the swap are modest on the schedules we read: $89.00 in Reno, $91.00 in Portland under a $167.00 minimum, $290 in San Francisco. The median HVAC mechanic earns $29.33 an hour, which implies $49.90 to $60.18 per billed hour.
Same box, or a different kind of box
The cheapest furnace replacement is the boring one. The new unit matches the old one's fuel, airflow direction and venting type, slides into the same footprint and connects to ducts that were already the right size. The installer adapts the plenum, reconnects gas, power, thermostat wire and flue, runs the startup checks and leaves.
Change any of those and you have bought more than a furnace.
- Venting type. Moving from a furnace that vents up a metal flue to a condensing unit means new plastic vent and intake pipes through a wall or the roof, a condensate drain, and sometimes a liner for the water heater left alone on the old chimney.
- Fuel conversion. Reno's schedule prices an oil to gas furnace permit at $133.00, above its $89.00 standard line, which tells you the city sees it as a bigger job. So will the installer: there is a gas line to run and a tank to deal with.
- Ducts. Undersized returns and leaky trunks are common and get blamed on the equipment. A contractor who measures static pressure before quoting is doing it right, and may propose duct changes that a competitor skipped.
- Location. Attics and crawlspaces add handling time and often a platform, lighting or drain pan the code now wants.
Labor arithmetic
| National wage point | Wage / hr | Loaded / hr | Implied billed hr, 15.5% margin | Implied billed hr, 29.9% margin | One worker-day (8 hr) at 29.9% |
|---|---|---|---|---|---|
| 25th percentile | $23.25 | $33.44 | $39.56 | $47.71 | $382 |
| Median | $29.33 | $42.19 | $49.90 | $60.18 | $481 |
| 75th percentile | $37.05 | $53.29 | $63.04 | $76.02 | $608 |
See HVAC mechanic wages for every metro.
Ask how many people and how many days. We have no public dataset of job durations, so put the question to the bidder. Whatever they answer, multiply worker-days by the column on the right and you have the labor share at a remodeler's margin.
Permit lines
| City | Line on the schedule | Fee | Schedule |
|---|---|---|---|
| Reno, NV | Residential EZ permit: furnace | $89.00 | EZ Permits and Miscellaneous Fees, effective July 1, 2026 |
| Reno, NV | Residential EZ permit: furnace, oil to gas | $133.00 | EZ Permits and Miscellaneous Fees, effective July 1, 2026 |
| Portland, OR | One and two family dwelling mechanical permit, minimum fee | $167.00 | Mechanical Permit Fee Schedule, effective July 10, 2026 |
| Portland, OR | Install or replace furnace or burner, including ductwork, vent and liner | $91.00 | Mechanical Permit Fee Schedule, effective July 10, 2026 |
| Grand Rapids, MI | Mechanical permit application, includes 1 inspection | $52.00 | Planning, Design and Development Fee Schedule, FY 2027, effective July 1, 2026 |
| Grand Rapids, MI | Mechanical, residential replacement: furnace | $21.00 | Planning, Design and Development Fee Schedule, FY 2027, effective July 1, 2026 |
| San Francisco, CA | Category 1M, single residential unit: mechanical gas appliance (furnace, hydronic heat, heat pump), maximum two inspections | $290 | Table 1A-C, Plumbing/Mechanical Issuance and Inspection Fees, effective July 12, 2026 |
Portland's own schedule says its furnace line includes ductwork, vent and liner. Grand Rapids separates the application fee from the equipment fee, so the two lines stack.
Equipment prices
| Series | BLS series ID | Month | Index | 12 months | Since Jan 2020 |
|---|---|---|---|---|---|
| Air conditioning and refrigeration equipment | WPU1148 | October 2026 (p) | 325.9 | +4.1% | +62.1% |
| CPI-U, all items, U.S. city average | CUUR0000SA0 | September 2026 | 336.9 | +3.7% | +30.6% |
Sorting the quotes
Each bid should name the model, the capacity and the efficiency rating, state what happens to the venting, list any duct changes, and say who pulls the permit. Be wary of a size picked by matching the old nameplate. Houses get insulated and re-windowed, and the old furnace may have been oversized on day one. A bidder who ran a load calculation has earned more trust than one who read a label.
Is the permit worth arguing about?
No. On every schedule we read it is a small fraction of one worker-day of labor, which at the national median implies about $481 at a remodeler's margin. The inspection that comes with it is a second set of eyes on a gas appliance.
Why would a furnace quote include work on the water heater?
Shared venting. If both appliances used one chimney and the new furnace vents through the wall, the water heater left behind may need a smaller liner to draft properly. It is a legitimate line, and it should be itemized.
Related guides
Sources
- BLS Occupational Employment and Wage Statistics, May 2025 metropolitan, state and national files
- BLS Employer Costs for Employee Compensation, June 2026, Table 4 (private industry by occupational and industry group)
- NAHB Eye on Housing, Remodelers Saw Profit Margin Gains in 2024 (Remodelers' Cost of Doing Business Study)
- Aswath Damodaran, NYU Stern, Margins by Sector (US), data as of January 2026
- BLS Producer Price Index commodity data and CPI-U, retrieved through the BLS public data API
- Reno, NV: EZ Permits and Miscellaneous Fees, effective July 1, 2026
- Portland, OR: Mechanical Permit Fee Schedule, effective July 10, 2026
- Grand Rapids, MI: Planning, Design and Development Fee Schedule, FY 2027, effective July 1, 2026
- San Francisco, CA: Table 1A-C, Plumbing/Mechanical Issuance and Inspection Fees, effective July 12, 2026